Page 99 of 99
Re: Micks 4mm LNER Models
Posted: Fri Mar 08, 2024 6:44 pm
by mick b
A2 City of Kingston Upon Hull finished.
Re: Micks 4mm LNER Models
Posted: Fri Mar 08, 2024 8:35 pm
by nzpaul
Beautifully done Mick. Impressed by the lining on the frames between the splashers, very fiddly.
Paul
Re: Micks 4mm LNER Models
Posted: Fri Mar 08, 2024 9:12 pm
by manna
G'Day Gents
Excellent work.
manna
Re: Micks 4mm LNER Models
Posted: Fri Mar 08, 2024 10:11 pm
by Hatfield Shed
Looks so fine, worth blowing up to O gauge size on screen for a closer inspection.
Re: Micks 4mm LNER Models
Posted: Sun Mar 10, 2024 12:46 am
by Dave
Very nice Mick.
Re: Micks 4mm LNER Models
Posted: Sun Mar 10, 2024 9:03 am
by mick b
Many thanks for the comments. She is a big heavy old girl !!
Re: Micks 4mm LNER Models
Posted: Tue Mar 12, 2024 6:25 pm
by mick b
Re: Micks 4mm LNER Models
Posted: Wed Mar 20, 2024 7:33 pm
by Chas Levin
Love that B&W view Mick - or is it actually a colour shot of the loco in works photographic grey?
Re: Micks 4mm LNER Models
Posted: Wed Mar 20, 2024 10:21 pm
by mick b
Same photo using the Camera software to Black & White . Ta.
Re: Micks 4mm LNER Models
Posted: Sun Apr 14, 2024 8:37 am
by mick b
Current build a Arthur K LNER D20 . Good kit , the only issue so far is the cab interior parts, required a lot of cutting etc. Next job will be the Boiler Handrails. Kit has provided internal motion parts, not very visible when assembled !!.
Re: Micks 4mm LNER Models
Posted: Tue Apr 16, 2024 12:26 am
by Tim Watson
Love the A2, for obvious reasons…
Tim
Re: Micks 4mm LNER Models
Posted: Mon Apr 22, 2024 4:53 pm
by mick b
D20 loco ready for paint.
Re: Micks 4mm LNER Models
Posted: Sat Apr 27, 2024 4:03 pm
by markindurham
Horsetan wrote: ↑Sun Feb 18, 2024 6:08 pm
nzpaul wrote: ↑Sun Feb 04, 2024 8:23 pm....I've built a couple of A2s using the Hornby A3/B12/Hall chassis as a starting point. They've worked out okay, but everything apart from the drive unit has to be built from scratch. On the plus side it is a cheap way of building one.
A2_19.jpg
GA2_7.jpg
Link to the page on my thread showing the second A2 under construction:
viewtopic.php?f=3&t=8323&start=360
The sheer length of the Raven really is quite something, very much in the ballpark of the GWR "Great Bear" which was another long one.
They weren't referred to as "Skittle Alleys" for nothing!
Mark
Re: Micks 4mm LNER Models
Posted: Mon Apr 29, 2024 2:15 pm
by mick b
D20 is now painted , lining etc will wait until the Tender is built.
Now on the go a Thompson Q1 3d print bought via ebay for £3, sitting on a spare Bachmann 04 chassis.
Obviously a partially failed print which has neded a lot of filling and levelling up on the large cracked offside. Other than a set of etched steps, all the other bits are from the spares box.
Now primed , this has shown a lot of further cleaning up required.