Original Chime Whistle Drawings

This forum is for the discussion of the locomotives, motive power, and rolling stock of the LNER and its constituent companies.

Moderators: 52D, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard, Tom F

Post Reply
Frisco1630
NER Y7 0-4-0T
Posts: 2
Joined: Wed Oct 24, 2018 6:04 am

Original Chime Whistle Drawings

Post by Frisco1630 » Wed Oct 24, 2018 6:07 am

Good evening gentlemen,

I'm a semi-regular engineer (excuse me, driver) on a 16" locomotive here in the states and have been thinking about trying to get a new whistle for her. Always been taken by the A4 chimes and thought that might make a nice touch. A friend of mine builds whistles, I just need to find the drawings.

On NRM's site I've been looking through the Doncaster drawings for everything related to whistles and have found a few that look promising - primarily " 310- 24/5/6/7 W: Regulators and general purpose brasswork: Whistle details" from 1936 which I'm hoping might be what I'm looking for. However before I go spend the money on getting the drawings scanned I thought I'd ask here if anyone on the forum either has these drawings or knows if I'm even barking up the right tree.


Thanks,
Joe

Seagull
GNSR D40 4-4-0
Posts: 242
Joined: Sun Oct 14, 2007 7:15 pm
Location: Between a cheap railway station and a ploughed field

Re: Original Chime Whistle Drawings

Post by Seagull » Thu Oct 25, 2018 1:24 am

Hello Joe,

Welcome to the forum.

The whistles fitted to most of the A4s were from the United States and were called Crosby Tri-note Whistles they are featured HERE.

As you will see on the attached address there are contact details for a gentleman in the US though the given date is 2001 so I am not sure if it is still current.

Most of the original whistles were taken off the locomotives at the start of WW2 and unfortunately were scrapped in the drive to recycle metal for the war effort. After the war replacements were made in the UK to the same design but from different thickness metal so the tone was slightly different.

The other ones used were a Canadian Pacific, New Zealand Railways and South African Railways whistles.

There is an earlier thread on the forum which gives more detail - viewtopic.php?t=8897

Alan
Playing trains, but trying to get serious

Frisco1630
NER Y7 0-4-0T
Posts: 2
Joined: Wed Oct 24, 2018 6:04 am

Re: Original Chime Whistle Drawings

Post by Frisco1630 » Thu Oct 25, 2018 11:50 pm

Thanks Alan, some valuable stuff there. Looks like NRM has the Doncaster drawings so I might try to get ahold of those.

Eightpot
NBR J36 0-6-0
Posts: 111
Joined: Sat Oct 25, 2008 1:29 pm

Re: Original Chime Whistle Drawings

Post by Eightpot » Sat Oct 27, 2018 6:04 pm

Re view topic. viewtopic.php?f=11&t=8897&start=15. and my contribution, the last one. If the initial poster would like to p.m. me, I could get some drawing copies done for him.

Reading_Steiner
NER Y7 0-4-0T
Posts: 9
Joined: Wed Nov 28, 2018 9:23 am

Re: Original Chime Whistle Drawings

Post by Reading_Steiner » Thu Nov 29, 2018 4:20 pm

What, you're allowed to customise your locomotives like that, adding your own whistles and everything? That's pretty cool, I thought these were corprorate property and that you shouldn't mess with them too much. Is it a standard practice in other countries and companies as well?

User avatar
richard
LNER A4 4-6-2 'Streak'
Posts: 3289
Joined: Thu Sep 01, 2005 5:11 pm
Location: Wichita Falls, Texas
Contact:

Re: Original Chime Whistle Drawings

Post by richard » Thu Nov 29, 2018 7:30 pm

If you own the locomotive, you can do what you want with it.

I think one of the original A4 chime whistles ended up on a Ffestiniog locomotive (~2ft gauge) although it might have made itself back to standard gauge (?)
Richard Marsden
LNER Encyclopedia

Post Reply