Gresley V1 & V3 2-6-2T

Post your photographs of the LNER and its Constituents here! Links to film/video are also welcome.

Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun

Post Reply
neildimmer
LNER A3 4-6-2
Posts: 1489
Joined: Sat Jan 10, 2009 11:49 am

Gresley V1 & V3 2-6-2T

Post by neildimmer »

I have added a new collection of photos featuring Gresley’s V1 & V3 class 2-6-2T

The London and North Eastern Railway (LNER) Class V1 and Class V3 were two classes of related 2-6-2T steam locomotive designed by Sir Nigel Gresley. A total of 82 V1s were built with 71 being rebuilt into the higher pressure V3s with an additional ten being built as V3s from the final batch of V1s. The V3 was a development of the V1 with increased boiler pressure and a resultant increase in tractive effort.
The development of large tank engines was somewhat delayed by problems on the Southern Railway following the Sevenoaks derailment thought to have been caused by the instability of the large K class 2-6-4 tanks. Gresley carried out stability tests on one of these locomotives and finding no trouble and without further delay produced his sophisticated V1 class suburban tank in 1930. This incorporated his 3-cylinder system and was the first example of all three cylinders and valve chests being incorporated into a single steel casting; this arrangement was used for the P2 Cock o' the North and the subsequent V2, K4 and V4 types.
Construction history
A total of 82 V1s were built at Doncaster from 1930 to 1939. The last batch of 10 engines ordered were built as V3s. By 1948, 4 V1s were rebuilt as V3s, and a further 67 would be rebuilt to V3 specification under British Railways ownership.
They were first used in Scotland on the Glasgow-Edinburgh - Helensburgh services. One, no 2911, was also tried in 1931 with excellent results on the Hitchin-London trains before returning to Scotland.
Later development of the V3
From 1939, with working pressure increased to 200 psi gave higher power and better acceleration. A number of V1s were rebuilt to conform.[3] French-style hopper type coal bunker were also fitted. By 1956 there were 57 V1 and 35 V3 types in service,[4] many on Newcastle-Middlesbrough services.
During World War II a number were transferred to help with the heavy wartime loads from the Royal Ordnance Factory at Thorp Arch until the end of the war.
The V1 and V3s were comparatively powerful engines suited to heavy and tightly timed suburban workings. As such they saw service on suburban services around Glasgow and Edinburgh. Several were also maintained at Hull for hauling suburban and branch-line workings in the area.
Some of the class were displaced by newer and more powerful Thompson L1 class. Withdrawals began in 1960, with the V1s being disposed of by 1962 and the V3s by 1964, as diesel multiple units took over increasing numbers of suburban services, and branch line workings became fewer as lines closed or were dieselised.

Including rail tour duty for
67646 + 42639 Barnard Castle R.C.T.S The North Yorkshireman Rail Tour 25th April 1964
https://tinyurl.com/4bzx7du4

Large collection of over 125 photos starts here with LNER era
417 looking brand new at Doncaster works
https://tinyurl.com/59cwpn8f

B.R. era photos start here with
67600 Glasgow Eastfield 19th April 1958
https://tinyurl.com/5n79xrk3
to
67691 Heaton 21st April 1958
https://tinyurl.com/y9ybz6db

Neil
https://tinyurl.com/4bzx7du4
Post Reply