Peco Bullhead
Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard
Re: Peco Bullhead
Exciting announcement. Even if it has hinged blades its still going to be a big improvement over the HO sized streamline. I've fired off an email to peco though as its going to be pretty useless without matching points. Even just medium radius L & R would do. It would look really odd next to HO scale point work.
JR
Re: Peco Bullhead
With the news of Peco's proposed bullhead track, has anyone seen this on rmweb?
http://www.rmweb.co.uk/community/index. ... pointwork/
http://www.rmweb.co.uk/community/index. ... pointwork/
- Atlantic 3279
- LNER A4 4-6-2 'Streak'
- Posts: 6544
- Joined: Fri Jun 26, 2009 9:51 am
- Location: 2850, 245
Re: Peco Bullhead
The amount of wholly irrelevant twaddle currently being discussed, yet again, by obsessive "we know everything about every kind of track" bores over on RMW, in a thread that is supposed to be purely about the forthcoming new Peco OO bullhead track, appears to have reached record levels....
If any of them have managed to stop being boring for long enough to produce offspring, I wonder if they have even taken the "father of the bride" speech at their daughter's wedding as an open invitation to drone on about technical details of full-size continuously welded flat-bottom rail, heavy concrete sleepers, deep ballasting and Hooke's Law?
If any of them have managed to stop being boring for long enough to produce offspring, I wonder if they have even taken the "father of the bride" speech at their daughter's wedding as an open invitation to drone on about technical details of full-size continuously welded flat-bottom rail, heavy concrete sleepers, deep ballasting and Hooke's Law?
Most subjects, models and techniques covered in this thread are now listed in various categories on page1
Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
-
- LNER A4 4-6-2 'Streak'
- Posts: 1666
- Joined: Fri Dec 23, 2011 3:34 pm
Re: Peco Bullhead
Meanwhile those of us with a sporting instinct are interested to see if Peco will be stirred into unaccustomed rates of action by the presence of a competitor? Much as JonR above, I feel that just LH and RH comparable to their present medium - or better still large - radius points are likely to best advertise the benefits. And are they going to stick with the constant crossing angle wangle, or attempt something rather closer to prototype?
I'd prefer that to the one I went to where the FotB was an unreconstructed Something-ist, and gave us the benefit of Marxo-whatsit dialectic on the oppressive institution of marriage. But then I spent much of my career around specialists who couldn't tell you the time, without first explaining the principles of timekeeping mechanisms from the clepsydra onwards; so have a fair tolerance for this kind of stuff.Atlantic 3279 wrote:... I wonder if they have even taken the "father of the bride" speech at their daughter's wedding as an open invitation to drone on about technical details of full-size continuously welded flat-bottom rail, heavy concrete sleepers, deep ballasting and Hooke's Law?
-
- GCR O4 2-8-0 'ROD'
- Posts: 581
- Joined: Tue Apr 30, 2013 7:15 pm
Re: Peco Bullhead
Life is too short; that particular thread I read as a sort of warning of what happens when you take things just that little bit too seriously.
I'm reserving passing judgement on the track until I have a piece of it in my hands to play with; I really couldn't care about how many bolts there are to each chair or which way the chocks are facing. I just hope either Peco or DCC hurry up with the pointwork!
I'm reserving passing judgement on the track until I have a piece of it in my hands to play with; I really couldn't care about how many bolts there are to each chair or which way the chocks are facing. I just hope either Peco or DCC hurry up with the pointwork!
- Atlantic 3279
- LNER A4 4-6-2 'Streak'
- Posts: 6544
- Joined: Fri Jun 26, 2009 9:51 am
- Location: 2850, 245
Re: Peco Bullhead
I certainly agree that pointwork is the vital element in this matter - we could actually make do very easily without any new plain track since the SMP and C&L options already cover that. From my own point of view the most helpful start on any range of points would be general equivalents of the current medium and large radius, R & L. It doesn't bother me whether or not the fixed crossing angle persists, but my stipulation for a "medium" point would be that the minimum nominal radius must not drop below 3 feet, and the "must adhere to real track geometry" pedants claim that a "proper" point cannot satisfy that requirement. Having built perfectly workable and in my view "reasonable looking" points that are as compact as the medium Peco ones, which don't have a tighter radius than 3ft, and which do achieve the necessary exit angle between the two tracks, I don't care whether any new Peco products have "real track geometry" in that respect. I just want to be able, with minimal fuss, to use medium ones as substitutes for existing medium ones or for my hand-built 3ft radius items. Minor trimming of plain track ends or tweaking of alignment to accommodate the new points might be tolerable in some places, but where existing points are shoe-horned in to complex formations I don't want to have to rip the whole lot out and re-design because the new stuff isn't compact enough to fit.
In the end of course, we'll get what Peco think best, and with any luck it will be good enough for us to be grateful for it.
In the end of course, we'll get what Peco think best, and with any luck it will be good enough for us to be grateful for it.
Most subjects, models and techniques covered in this thread are now listed in various categories on page1
Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
Re: Peco Bullhead
Posted over on RMweb.
http://www.rmweb.co.uk/community/index. ... try2512029
Looks promising. Particularly nice to see they have moved away from the old style point blades.
I knew that all I had to do was purchase some SMP Scaleway and magically the PECO would appear!
http://www.rmweb.co.uk/community/index. ... try2512029
Looks promising. Particularly nice to see they have moved away from the old style point blades.
I knew that all I had to do was purchase some SMP Scaleway and magically the PECO would appear!
-
- GER D14 4-4-0 'Claud Hamilton'
- Posts: 371
- Joined: Wed Jun 24, 2015 7:30 pm
- Location: Scunthorpe, North Lincs
Re: Peco Bullhead
how fantastically convenient given that I don't have any layout to speak of right now.teaky wrote:http://www.rmweb.co.uk/community/index. ... try2512029
Looks promising. Particularly nice to see they have moved away from the old style point blades.
Now I can have decent track and pointwork without resorting to hand building, not that there's anything wrong with code 100.
Coalby and Marblethorpe, my vision of an un-nationalised Great Britain in the 50s and 60s: viewtopic.php?f=3&t=11905
36C Studeos, kits in 4MM scale: viewtopic.php?f=3&t=11947
36C Studeos, kits in 4MM scale: viewtopic.php?f=3&t=11947
Re: Peco Bullhead
Hatton's have this (SL108F) in stock. £4.50 for one (yard) piece or £100 for a box of 25, saving of £12.50
http://www.hattons.co.uk/246684/Peco_Pr ... etail.aspx
There's a big write up on the track in the January RM on page 79. The sleepers are still overdeep "so as to match the existing code 75 track to avoid any packing when connecting the two".
The inner jaws of the 3 bolt type chairs are reduced in height to allow clearance for deeper wheel flanges.
The price compares to Marcway's price of £46.50 for 10 yards of SMP track.
So the Peco track works out at £4 per yard as against SMP's £4.65 if bought in bulk.
http://www.hattons.co.uk/246684/Peco_Pr ... etail.aspx
There's a big write up on the track in the January RM on page 79. The sleepers are still overdeep "so as to match the existing code 75 track to avoid any packing when connecting the two".
The inner jaws of the 3 bolt type chairs are reduced in height to allow clearance for deeper wheel flanges.
The price compares to Marcway's price of £46.50 for 10 yards of SMP track.
So the Peco track works out at £4 per yard as against SMP's £4.65 if bought in bulk.
- Atlantic 3279
- LNER A4 4-6-2 'Streak'
- Posts: 6544
- Joined: Fri Jun 26, 2009 9:51 am
- Location: 2850, 245
Re: Peco Bullhead
A practical update on this old chestnut here:
http://www.rmweb.co.uk/community/index. ... ?p=2943550
Same topic starts several pages back with various images of the new points in standard form.
More economical on forum image storage space to simply put the link here rather than duplicate the whole content of the curved points test report....
http://www.rmweb.co.uk/community/index. ... ?p=2943550
Same topic starts several pages back with various images of the new points in standard form.
More economical on forum image storage space to simply put the link here rather than duplicate the whole content of the curved points test report....
Most subjects, models and techniques covered in this thread are now listed in various categories on page1
Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
Re: Peco Bullhead
I simply do not understand people who spend their entire lives telling everyone who will listen what good modellers they are (but shows us nothing in the way of actual modelling by way of return) to the extent that it's almost "how dare Peco make turnouts that everyone can use" (!!!)
Good post there Graeme but I fear the extremes of modellers make it increasingly difficult for anything reasonable to be heard or observed these days.
Good post there Graeme but I fear the extremes of modellers make it increasingly difficult for anything reasonable to be heard or observed these days.