Just wondering if anyone has heard anything from Dan in the last year or so?
Andrew
D&S kits
Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard
-
- LNER Thompson B1 4-6-0 'Antelope'
- Posts: 691
- Joined: Tue Nov 27, 2012 8:59 am
- Location: South Australia
- notascoobie
- GCR O4 2-8-0 'ROD'
- Posts: 554
- Joined: Sun Jul 20, 2008 9:43 pm
- Location: S Yorkshire
Re: D&S kits
Hi Andrew,
I've seen Dan selling kits at some Gauge O Guild events over the past couple of years. Most recently at Telford last September. He looks great for his age. Plus a friend spoke to him on the 'phone a few weeks back.
A great guy who has provided great kits and plenty of encouragement over the years. It's always a pleasure to see him.
Vernon
I've seen Dan selling kits at some Gauge O Guild events over the past couple of years. Most recently at Telford last September. He looks great for his age. Plus a friend spoke to him on the 'phone a few weeks back.
A great guy who has provided great kits and plenty of encouragement over the years. It's always a pleasure to see him.
Vernon
-
- LNER Thompson B1 4-6-0 'Antelope'
- Posts: 691
- Joined: Tue Nov 27, 2012 8:59 am
- Location: South Australia
Re: D&S kits
Thanks Vernon that's good news. I'll have to ring him to chase up an issue I had with a missing etch in a 4mm GN CCT I got a couple of years back. I wrote to him about it sometime ago as that's how I've normally dealt with him over the years from South Australia.
Andrew
Andrew
Re: D&S kits
Dan lives 10-15 minutes away from me but it must be 6 months since I called in. He was in really good health but a family member has a long term debilatating illness so he's seconded to childcare duties a lot of the time.
You can usually get him on the phone but I think the last promised list is just a bit too much work at present.
You can usually get him on the phone but I think the last promised list is just a bit too much work at present.
Re: D&S kits
If you get a reply please, bear this in mind if you do speak to him.
Common opinion elsewhere on the various forums,was to write to him. Dont phone due to the above health issues.
Following that advice I wrote to him January asking to buy replacement parts for some NER 52ft Clerestory Coaches ( Clerestory roof etched parts x3). Sadly no response so far, I have also sent him two s.a.e 's in the last 3 years, for price lists, again with the same result.
Has anyone had a replies over the last couple of years from him ??.
Common opinion elsewhere on the various forums,was to write to him. Dont phone due to the above health issues.
Following that advice I wrote to him January asking to buy replacement parts for some NER 52ft Clerestory Coaches ( Clerestory roof etched parts x3). Sadly no response so far, I have also sent him two s.a.e 's in the last 3 years, for price lists, again with the same result.
Has anyone had a replies over the last couple of years from him ??.
- Chas Levin
- NBR D34 4-4-0 'Glen'
- Posts: 278
- Joined: Fri Apr 10, 2015 11:54 am
- Location: London
Re: D&S kits
I bought quite a few kits from his lists during 2018-19 and always had replies by post, very helpful and friendly, including build advice, spare parts etc, but I'd not had a reply to my last couple of letters from earlier this year. I assumed he must be busy and that I'd hear back in due course, but it has now been quite a while; I hope he's doing OK in the lockdown situation...
Chas
-
- LNER A4 4-6-2 'Streak'
- Posts: 1747
- Joined: Fri Oct 19, 2007 2:44 pm
- Location: Overlooking the GEML
Re: D&S kits
I spoke with Dan last week, in fact we had a long chat about various matters. Yes he has increasingly pressing family commitments but he has also been completing commissions for models taken over the last year or so, so much less time on the kit side and etcher. I must confess I didn't think to enquire if his etcher was working as kits were not the reason for my call. I think he's OK for 7mm stock and, because the reason I rang was in connection with an article I'm finishing for the GERS Journal which concludes with a note regarding the availability of kits, he was agreeable to my wording regarding his 4mm kits including producing batches of these particular vans if sufficient interest shown.
I think he would take a 'phone call if he's available but a letter (with SAE) might be more convenient for him but, if you've written and had no reply, then do try the 'phone.
If it's for a price list, the last 4mm one was done a long time ago (we commented on this) whilst the 7mm one is also getting dated. He has not directed his attention to these.
I think he would take a 'phone call if he's available but a letter (with SAE) might be more convenient for him but, if you've written and had no reply, then do try the 'phone.
If it's for a price list, the last 4mm one was done a long time ago (we commented on this) whilst the 7mm one is also getting dated. He has not directed his attention to these.