Micks 4mm LNER Models

This forum is for the discussion of railway modelling of the LNER and its constituent companies.

Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard

mick b
LNER A4 4-6-2 'Streak'
Posts: 3727
Joined: Tue May 30, 2006 4:43 pm

Re: Micks 4mm LNER Models

Post by mick b »

The three D&S NER Coaches awaiting Roofs

D.5 Comp
fullsizeoutput_3132.jpeg
D.14 all 3rd
fullsizeoutput_312f.jpeg
D.18 BK 3rd
fullsizeoutput_3130.jpeg
mick b
LNER A4 4-6-2 'Streak'
Posts: 3727
Joined: Tue May 30, 2006 4:43 pm

Re: Micks 4mm LNER Models

Post by mick b »

D&S GCR Milk van ready for painting.
fullsizeoutput_3133.jpeg


I have looked at the Banks site

He has a built one at the bottom of this page.

https://www.steve-banks.org/modelling/332-gcr-milk-vans

I have noticed on his, he has added card behind the louvres, this not mentioned on the D&S instructions and he hasnt given a reason for the blocking.

I presume before I go any further wih my kit that the louvres would be open ? . It seem pointless to louvre the van and then block them off ?

Any comments appreciatted.
jwealleans
LNER A4 4-6-2 'Streak'
Posts: 4208
Joined: Wed Oct 25, 2006 8:46 am

Re: Micks 4mm LNER Models

Post by jwealleans »

I think it's just so the van isn't see-through, Mick. I did the same with a GE Milk van of Bill's I built a few years ago.
mick b
LNER A4 4-6-2 'Streak'
Posts: 3727
Joined: Tue May 30, 2006 4:43 pm

Re: Micks 4mm LNER Models

Post by mick b »

Jonathan,

I quite like the see through effect . However it has been pointed out on the Dark side, that you cannot see through Louvres, so I will add backing to mine as well.

Thanks
Woodcock29
LNER Thompson B1 4-6-0 'Antelope'
Posts: 686
Joined: Tue Nov 27, 2012 8:59 am
Location: South Australia

Re: Micks 4mm LNER Models

Post by Woodcock29 »

I put card behind the louvres in mine, but clearly I've never taken a photo of it.

Andrew
john coffin
LNER V2 2-6-2 'Green Arrow'
Posts: 1087
Joined: Mon Sep 19, 2011 12:24 am

Re: Micks 4mm LNER Models

Post by john coffin »

It's worth remembering that louvres are not actually see through, certainly not in 4mm scale, but
the only way you can easily reproduce them is to make them see through.
On the real thing, the louvres open and close like plantation shutters in the home.
Their job is to allow circulation of air, and so on, not to allow you to look through. Also, when in
use as full vehicles, they would have cargo of some description which would block the light going
through to the other side.

Those interested in real scale reproduction could add the angled piece on the outside, but that would
get really boring :roll:

Paul
mick b
LNER A4 4-6-2 'Streak'
Posts: 3727
Joined: Tue May 30, 2006 4:43 pm

Re: Micks 4mm LNER Models

Post by mick b »

D&S GCR Milk Van finished with back filled Louvres, lovely little kit.
IMG_1703.JPG
IMG_1704.JPG
Mercator II
GCR O4 2-8-0 'ROD'
Posts: 508
Joined: Mon Nov 03, 2008 12:14 pm
Location: Lincolnshire

Re: Micks 4mm LNER Models

Post by Mercator II »

TTTE 1
TTTE 1
That has a certain familiarity to it....

Cheap alternatives maybe
oOo

Brian

Garage Hobbit!!
Modelling in 00 on my heritage line, very GCR inspired
User avatar
Chas Levin
NBR D34 4-4-0 'Glen'
Posts: 276
Joined: Fri Apr 10, 2015 11:54 am
Location: London

Re: Micks 4mm LNER Models

Post by Chas Levin »

mick b wrote: Sun May 24, 2020 4:03 pm D&S GCR Milk Van finished with back filled Louvres, lovely little kit.
Lovely little kit indeed Mick :D

May I please ask what brand and shade of paint you used, or is it a blend?
Chas
mick b
LNER A4 4-6-2 'Streak'
Posts: 3727
Joined: Tue May 30, 2006 4:43 pm

Re: Micks 4mm LNER Models

Post by mick b »

Precision LNER Teak Brown , the Milk van has a light top coat of thin matt black, mainly corners and in the louvre grooves.

cheers
User avatar
SAD Burdett
H&BR Q10 0-8-0
Posts: 195
Joined: Mon Dec 11, 2006 12:07 pm
Location: North Walsham
Contact:

Re: Micks 4mm LNER Models

Post by SAD Burdett »

mick b wrote: Sun May 24, 2020 4:03 pm D&S GCR Milk Van finished with back filled Louvres, lovely little kit.

IMG_1703.JPG

IMG_1704.JPG
That looks lovely Mick,,, I particularly like the large NE lettering on the louvres,,,, difficult to do or not???

SAD :(
Modelling 4mm finescale 00. LNER GCR GNR.
If anyone in Norwich area wants to visit and natter you are very welcome, just make contact.
http://salmonpastures.blogspot.co.uk
mick b
LNER A4 4-6-2 'Streak'
Posts: 3727
Joined: Tue May 30, 2006 4:43 pm

Re: Micks 4mm LNER Models

Post by mick b »

That is after 3 attempts !!
First two times using Pressfix , I tried cutting through each louvre ,after pressing decals into the gaps, with a brand new scapel blade, both times the decals broke up in different places.
The last time as in the photos, decals pressed into gaps and a pencil line and weathering added . Job done !!
mick b
LNER A4 4-6-2 'Streak'
Posts: 3727
Joined: Tue May 30, 2006 4:43 pm

Re: Micks 4mm LNER Models

Post by mick b »

E bay find .



D&S NER Clerestory Dia 7 Compo and another Dia 18 Brake Third.

Photos show them broken down into component parts. I have just stripped the paint off both ( brush painted onto Brass without primer and lumps and bumps in paint), as they both have most of the parts present, I will probably rebuild these first , the other ex NER Clerestories shown earlier are still awating the roof etches arrival.



Has anyone a copy of the Dia 7 instructions and/or some of the Dia 7 running numbers please ?? Also needed are cast Gas Tanks x 4 and a number of the small round bottom of the Bolster? brass fittings for the bogie springs, cast Queen Posts x 4 if anybody knows a source for these items or similar please ??

I cant post photos as the files I have are too large.

They are on

https://www.rmweb.co.uk/community/index ... m/page/41/
User avatar
ArthurK
GNSR D40 4-4-0
Posts: 241
Joined: Sat May 08, 2010 4:23 pm
Location: Lancashire

Re: Micks 4mm LNER Models

Post by ArthurK »

mick b wrote: Sun Jun 21, 2020 2:00 pm E bay find .



D&S NER Clerestory Dia 7 Compo and another Dia 18 Brake Third.

Photos show them broken down into component parts. I have just stripped the paint off both ( brush painted onto Brass without primer and lumps and bumps in paint), as they both have most of the parts present, I will probably rebuild these first , the other ex NER Clerestories shown earlier are still awating the roof etches arrival.



Has anyone a copy of the Dia 7 instructions and/or some of the Dia 7 running numbers please ?? Also needed are cast Gas Tanks x 4 and a number of the small round bottom of the Bolster? brass fittings for the bogie springs, cast Queen Posts x 4 if anybody knows a source for these items or similar please ??

I cant post photos as the files I have are too large.

They are on

https://www.rmweb.co.uk/community/index ... m/page/41/
Mick

You may not be aware of the NERA publication "NER Passenger Train Rolling Stock as at December 31st 1906 (numerical listing)"
Very useful if you are after Diagrams, Dates & numbers.

ArthurK
mick b
LNER A4 4-6-2 'Streak'
Posts: 3727
Joined: Tue May 30, 2006 4:43 pm

Re: Micks 4mm LNER Models

Post by mick b »

Thanks
Post Reply