Micks 4mm LNER Models
Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard
Re: Micks 4mm LNER Models
A2 City of Kingston Upon Hull finished.
-
nzpaul
- LNER Thompson B1 4-6-0 'Antelope'
- Posts: 613
- Joined: Sat Sep 24, 2011 11:48 am
- Location: New Zealand
Re: Micks 4mm LNER Models
Beautifully done Mick. Impressed by the lining on the frames between the splashers, very fiddly.
Paul
Paul
-
Hatfield Shed
- LNER A4 4-6-2 'Streak'
- Posts: 1725
- Joined: Fri Dec 23, 2011 3:34 pm
Re: Micks 4mm LNER Models
Looks so fine, worth blowing up to O gauge size on screen for a closer inspection.
-
Dave
- LNER A4 4-6-2 'Streak'
- Posts: 1731
- Joined: Sat Nov 13, 2010 9:33 pm
- Location: Centre of the known universe York
Re: Micks 4mm LNER Models
Very nice Mick.
Re: Micks 4mm LNER Models
Many thanks for the comments. She is a big heavy old girl !! 
Re: Micks 4mm LNER Models
Nearside view
-
Chas Levin
- NBR D34 4-4-0 'Glen'
- Posts: 299
- Joined: Fri Apr 10, 2015 11:54 am
- Location: London
Re: Micks 4mm LNER Models
Love that B&W view Mick - or is it actually a colour shot of the loco in works photographic grey?
Chas
Re: Micks 4mm LNER Models
Same photo using the Camera software to Black & White . Ta.
Re: Micks 4mm LNER Models
Current build a Arthur K LNER D20 . Good kit , the only issue so far is the cab interior parts, required a lot of cutting etc. Next job will be the Boiler Handrails. Kit has provided internal motion parts, not very visible when assembled !!.
-
Tim Watson
- GER D14 4-4-0 'Claud Hamilton'
- Posts: 339
- Joined: Mon Oct 24, 2016 11:37 am
Re: Micks 4mm LNER Models
Love the A2, for obvious reasons…
Tim
Tim
Re: Micks 4mm LNER Models
D20 loco ready for paint.
-
markindurham
- H&BR Q10 0-8-0
- Posts: 189
- Joined: Tue Mar 27, 2012 9:38 am
Re: Micks 4mm LNER Models
They weren't referred to as "Skittle Alleys" for nothing!Horsetan wrote: ↑Sun Feb 18, 2024 6:08 pmThe sheer length of the Raven really is quite something, very much in the ballpark of the GWR "Great Bear" which was another long one.nzpaul wrote: ↑Sun Feb 04, 2024 8:23 pm....I've built a couple of A2s using the Hornby A3/B12/Hall chassis as a starting point. They've worked out okay, but everything apart from the drive unit has to be built from scratch. On the plus side it is a cheap way of building one.
A2_19.jpg
GA2_7.jpg
Link to the page on my thread showing the second A2 under construction:
viewtopic.php?f=3&t=8323&start=360
Mark
Re: Micks 4mm LNER Models
D20 is now painted , lining etc will wait until the Tender is built.
Now on the go a Thompson Q1 3d print bought via ebay for £3, sitting on a spare Bachmann 04 chassis.
Obviously a partially failed print which has neded a lot of filling and levelling up on the large cracked offside. Other than a set of etched steps, all the other bits are from the spares box.
Now primed , this has shown a lot of further cleaning up required.
Now on the go a Thompson Q1 3d print bought via ebay for £3, sitting on a spare Bachmann 04 chassis.
Obviously a partially failed print which has neded a lot of filling and levelling up on the large cracked offside. Other than a set of etched steps, all the other bits are from the spares box.
Now primed , this has shown a lot of further cleaning up required.
Re: Micks 4mm LNER Models
D20 tender completed. Now painted in Halfords Matt Black is the Loco . Lining out has commenced.