Bulleid's "Leader"

This forum is for the discussion of all railway subjects that do not include the LNER, and its constituent companies.

Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard

Post Reply
Kyle1987
LNER N2 0-6-2T
Posts: 59
Joined: Thu Sep 15, 2005 12:11 pm
Location: Victoria, Australia

Bulleid's "Leader"

Post by Kyle1987 »

I am a big fan of the LNER, but after reading about Oliver Bulleid's "Leader" class loco I was intrigued. However, i have been unable to find any information, or (more importantly, lol) pictures. Does anyone know where I may be able to find this info?

Thanks every1, Kyle

(PS: I am in Australia, so the library offers little help)
Top
User avatar
Rlangham
LNER P2 2-8-2
Posts: 916
Joined: Sat Sep 24, 2005 2:52 pm
Location: GWR Territory
Contact:
Contact Rlangham

Post by Rlangham »

A page with a photo here

http://www.dself.dsl.pipex.com/MUSEUM/L ... leader.htm

Not very aesthetically pleasing is she? :shock:
Top
Kyle1987
LNER N2 0-6-2T
Posts: 59
Joined: Thu Sep 15, 2005 12:11 pm
Location: Victoria, Australia

Post by Kyle1987 »

Definitely one of the strangest looking steam locos ive ever seen! Still, i would love to see a kit come out...
Top
Tom Quayle
GCR D11 4-4-0 'Improved Director'
Posts: 441
Joined: Tue Dec 06, 2005 9:41 am
Location: Barrow in furness Cumbria/HMS Collingwood Fareham
Contact:
Contact Tom Quayle

Post by Tom Quayle »

lol not one of the southern regions most pleasing locos to look at but would make an interesting model. I prefer the 10201-03 series for looks and modelling potential
The weather here is Baltic but so were the tank engines
Furness Railway and GCR fan.
125mph tilt vs 126.5mph duck
Advanced North West Productions.
Top
User avatar
richard
LNER A4 4-6-2 'Streak'
Posts: 3387
Joined: Thu Sep 01, 2005 5:11 pm
Location: Wichita Falls, Texas
Contact:
Contact richard

Post by richard »

There of course, is another big "What if..."

What if Bulleid had stayed on with the LNER? He would then be the natural person to take over when Gresley died...

The Bulleid Pacifics may not have happened, but perhaps something resembling the Q1 and the Leader? - but in LNER colours



Richard
Richard Marsden
LNER Encyclopedia
Top
Colombo
LNER Thompson B1 4-6-0 'Antelope'
Posts: 657
Joined: Mon Oct 03, 2005 4:44 pm
Location: Derbyshire
Contact:
Contact Colombo

Post by Colombo »

Sorry to come in so late on this thread.

I can recommend the following book:

Leader: Steam's Last Chance (ISBN: 0862993768)
Robertson, Kevin

Abe books have several on offer.

The big problem with Leader was that it used huge quantities of lubricating oil for the gear boxes. It was estimated that the lube oil cost about as much as the fuel for a diesel loco on the same journey. Alas it threw oil all over the track.

Colombo
Top
Wandering1500
LNER J94 0-6-0ST Austerity
Posts: 40
Joined: Sun Jan 22, 2006 1:44 am
Location: Lancashire, England

Post by Wandering1500 »

Plus of course the horrendous conditions the fireman had to suffer?

David
Image
Top
Colombo
LNER Thompson B1 4-6-0 'Antelope'
Posts: 657
Joined: Mon Oct 03, 2005 4:44 pm
Location: Derbyshire
Contact:
Contact Colombo

Post by Colombo »

David,

Yes indeed, the fireman had very little room to move around. I think that the loco would have been more suited to oil firing.

Also the loco came out 30 tons over weight, partly because it was carrying 2.5 tons of ballast weights to compensate for the boiler being offset over the frames. And finally it was only designed to replace the M7s on the western division.

The faults in the initial design were such that he could never have progressed any further without starting again from scratch. Amazingly OVSB then went off to Ireland and built the turf burner for the CIE.

Colombo
Top
Muzza
LNER N2 0-6-2T
Posts: 57
Joined: Fri Feb 10, 2006 2:22 am
Location: Mareeba, Australia

Bulleid's Leader

Post by Muzza »

For more info about the Leader, try here:

http://semg.org.uk/steam/leader_01.html

Thank goodness for the web.
Top
Post Reply

Return to “Railway Chat”