I've now made the tank front steps, and the running plate grab rails
![Image](https://live.staticflickr.com/7890/40601558923_a60066aac2_c.jpg)
Both were turned out from scrap material left over from this project, I'm not sure if the "step-lets" can even be bought off the shelf, no matter though, they aren't exactly the most difficult part to make, and unlike the bunker step-lets, they aren't flared at each end.
I do still need to further detail the top surfaces of the tanks, and for those parts, I am mostly dependant on pictures of models (Richards', as well as a few others from Google), as pictures of the original loco's from a higher angle appear to be in absentia.
Lamp irons are the other item I need to tackle next, i've got some scrap brass I'll try out for making them, but if that goes wrong, I might well be on the search. The Comet models step kit has proved most useful for proving the brass needed to make all of these bits............
Paul.