Project 65033 - a 3D printed LNER J21

This forum is for the discussion of railway modelling of the LNER and its constituent companies.

Moderators: 52D, Tom F, Rlangham, Atlantic 3279, Blink Bonny, Saint Johnstoun, richard

User avatar
Atlantic 3279
LNER A4 4-6-2 'Streak'
Posts: 6527
Joined: Fri Jun 26, 2009 9:51 am
Location: 2850, 245

Re: Project 65033 - a 3D printed LNER J21

Post by Atlantic 3279 »

jwealleans wrote: Tue Jul 05, 2022 6:17 pm That has an undeniable whiff of plausibility about it.
A bit soon for a senior moment isn't it JW? You're only allowed to introduce those, on a small scale, once you reach 60.
Most subjects, models and techniques covered in this thread are now listed in various categories on page1

Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
jwealleans
LNER A4 4-6-2 'Streak'
Posts: 4208
Joined: Wed Oct 25, 2006 8:46 am

Re: Project 65033 - a 3D printed LNER J21

Post by jwealleans »

As i often have to remind my nearest and dearest, now I have Manager in my job title, i am never wrong, simply misinformed.
williamhale1711
NER Y7 0-4-0T
Posts: 5
Joined: Tue Jul 05, 2022 1:52 pm

Re: Project 65033 - a 3D printed LNER J21

Post by williamhale1711 »

Dear Paul Sterling (to avoid confusion!)

Many thanks, I'd much like to order a print of the J21, and am quite prepared to wait. How do I communicate with you? Will you send me an e-mail to the one I have registered with the Forum, or what? Many apologies, but I'm new to this game.

Yours ever,

William
User avatar
Atlantic 3279
LNER A4 4-6-2 'Streak'
Posts: 6527
Joined: Fri Jun 26, 2009 9:51 am
Location: 2850, 245

Re: Project 65033 - a 3D printed LNER J21

Post by Atlantic 3279 »

As you won't yet have access to the forum's private message system William, one option is to put a coded (but not plain) version of your e-mail address on here for Paul, and then delete it (using the edit post button) as soon as you hear from him. You might consider, for example, a version something like william(dash)hale(no space)123(AT)xyzmail(DOT)com - that might avoid making it too easy for robots to gather your e-mail address and fill your inbox with rubbish.

Unless other know a better way...
Most subjects, models and techniques covered in this thread are now listed in various categories on page1

Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
Paul_sterling
GER D14 4-4-0 'Claud Hamilton'
Posts: 332
Joined: Fri May 10, 2013 12:50 pm
Location: Durham

Re: Project 65033 - a 3D printed LNER J21

Post by Paul_sterling »

Hi William.

Best thing is to meet the forums post threshold, rather than putting your email on a post. I won't be able to see your account email.

It's not many posts I think. 20?

Thanks. Paul.
williamhale1711
NER Y7 0-4-0T
Posts: 5
Joined: Tue Jul 05, 2022 1:52 pm

Re: Project 65033 - a 3D printed LNER J21

Post by williamhale1711 »

Hello Atlantic and Paul,

How about this? My e-mail address is publicly listed on an academic website, which also has an excellent spam-elimination system. If I send a post, with the website address, and instructions would that be acceptable? Please let me know!

Yours ever,

William Hale
Paul_sterling
GER D14 4-4-0 'Claud Hamilton'
Posts: 332
Joined: Fri May 10, 2013 12:50 pm
Location: Durham

Re: Project 65033 - a 3D printed LNER J21

Post by Paul_sterling »

I've sent you a private message William. You may not be able to reply to it, but the salient info is on there to place an order bud.

Thanks.
Paul
williamhale1711
NER Y7 0-4-0T
Posts: 5
Joined: Tue Jul 05, 2022 1:52 pm

Re: Project 65033 - a 3D printed LNER J21

Post by williamhale1711 »

Hello Paul,

Many thanks, that's very kind but how do I access the private message? - there's nothing from you in my in-box.

Many apologies for the bother,

William
User avatar
richard
LNER A4 4-6-2 'Streak'
Posts: 3385
Joined: Thu Sep 01, 2005 5:11 pm
Location: Wichita Falls, Texas
Contact:

Re: Project 65033 - a 3D printed LNER J21

Post by richard »

I think you might do now (or possibly one more approved post).

PMs and forum posts are moderated for the first few.
Richard Marsden
LNER Encyclopedia
Paul_sterling
GER D14 4-4-0 'Claud Hamilton'
Posts: 332
Joined: Fri May 10, 2013 12:50 pm
Location: Durham

Re: Project 65033 - a 3D printed LNER J21

Post by Paul_sterling »

williamhale1711 wrote: Wed Jul 06, 2022 8:39 pm Hello Paul,

Many thanks, that's very kind but how do I access the private message? - there's nothing from you in my in-box.

Many apologies for the bother,

William
Should be able to see them once approval point is reached.

In the meantime, 2 rail or 3 rail tender?

Thanks.
Paul
williamhale1711
NER Y7 0-4-0T
Posts: 5
Joined: Tue Jul 05, 2022 1:52 pm

Re: Project 65033 - a 3D printed LNER J21

Post by williamhale1711 »

Hello Paul,

Many thanks - I guess I'll just have to wait for approval. Meanwhile, 2-rail tender will be fine.

Yours ever,

William
User avatar
richard
LNER A4 4-6-2 'Streak'
Posts: 3385
Joined: Thu Sep 01, 2005 5:11 pm
Location: Wichita Falls, Texas
Contact:

Re: Project 65033 - a 3D printed LNER J21

Post by richard »

you have it - that post was posted without me approving it :-)
Richard Marsden
LNER Encyclopedia
User avatar
Atlantic 3279
LNER A4 4-6-2 'Streak'
Posts: 6527
Joined: Fri Jun 26, 2009 9:51 am
Location: 2850, 245

Re: Project 65033 - a 3D printed LNER J21

Post by Atlantic 3279 »

Maybe not - I did my moderator's job for once, and gave it approval.
Most subjects, models and techniques covered in this thread are now listed in various categories on page1

Dec. 2018: Almost all images that disappeared from my own thread following loss of free remote hosting are now restored.
Paul_sterling
GER D14 4-4-0 'Claud Hamilton'
Posts: 332
Joined: Fri May 10, 2013 12:50 pm
Location: Durham

Re: Project 65033 - a 3D printed LNER J21

Post by Paul_sterling »

Q
williamhale1711 wrote: Thu Jul 07, 2022 5:05 pm Hello Paul,

Many thanks - I guess I'll just have to wait for approval. Meanwhile, 2-rail tender will be fine.

Yours ever,

William
No problem William. 65033 generally sells with the 2 rail, though I gather just prior to preservation, it ran with a boarded 3 rail, or even a 4 rail.

Thanks.
Paul
Flit
NER Y7 0-4-0T
Posts: 8
Joined: Tue Jan 17, 2023 6:42 pm

Re: Project 65033 - a 3D printed LNER J21

Post by Flit »

Very keen to have a go at building a J21 (ideally several given my NE Pennine branchline obsessions) from a printed body and 52F's chassis and linked powertrain as OO.

Is Paul still taking commissions for his 3D printed version ?


All the best,

Tony
Last edited by Flit on Thu Jan 19, 2023 10:55 am, edited 1 time in total.
Post Reply