border image border image
 
           
 
   
border image border image
border image border image
 
0-6-0 Tender
J1
J2
J3
J4
J5
J6
J7
GCR '18'
J8
J9
J10
J11
J12
J13
J14
J15
J16
J17
J18
J19
J20
 
J21 - J41
 
0-6-0 Tank
J45 - J70
J71 - J94

The Holden J16 & J17 (GER Classes F48 & G58) 0-6-0 Locomotives

J16 LNER No. 8163 (M.Peirson)

Within months of building D14 Claud Hamilton, James Holden introduced a freight 0-6-0 version of the design. Using the same boiler and cylinders as the D14s and a large two window cab, the new Class F48 locomotives were the UK's largest 0-6-0 tender locomotives at that time. The Great Eastern Railway (GER) built sixty Class F48 engines between 1900 and 1903, in six batches of ten each.

Fifty nine of these original locomotives were fitted with the original round-topped firebox design used on the D14 4-4-0, and they would be classified as J16 by the LNER. The exception was No. 1189 which was built with a Belpaire firebox as a comparative experiment. The experiment was deemed a success, and the Belpaire variant of the F45 entered production. A total of thirty new Belpaire 0-6-0s (GER Class G58) were built in three batches between 1905 and 1911. No. 1138 was then included in GER Class G58. The LNER classified the Belpaire locomotives as J17.

The GER started to rebuild round-topped J16s as Belpaire J17s in 1921. Forty six J16s remained at Grouping (1923), and all had been rebuilt by 1932. The GER started to fit superheaters to the Belpaire J17s in 1915. All but three of the J16s had superheaters fitted at the same time as the Belpaire fireboxes. Three exceptions received second-hand saturated Belpaire fireboxes in 1926-9. These had superheaters fitted in 1930-1. The superheaters were of the 18 element Robinson type, as fitted to the D15 4-4-0s. The fitting of superheaters was also accompanied with the fitting of 6in longer smokeboxes, and the fitting of a new balanced pattern of slide valve.

It has been speculated that the J17s may have been rebuilt with the round-topped fireboxes used on the D16/3s after the J18 & J19 locomotives had been similarly rebuilt in 1938. It appears likely that this was never seriously considered due to the outbreak of World War 2, and the fact that the J17s were considered to be almost life expired. World War 2 actually extended the life of the J17s, and new boilers were built until 1954.

J17 No. 8211 at Peterborough in 1939

A number of D14 Claud modifications were also duplicated on the J16s and J17s. These included the replacement of early low roof cabs by 7in wider cabs with higher roofs. However unlike the Clauds, the J17s kept their wooden cab roofs through the 1930s and only five J17s finally received steel roofs in the 1950s.

The J16s and J17s were initially built with Dewrance or Stone sight-feed lubricators. These were replaced with Wakefield mechanical lubricators at the time of superheating. In common with most GER types, these locomotives were built with Ramsbottom safety valves which were replaced by Ross pop safety valves by the LNER. Conversions started in 1925, and at least one J17 was still fitted with Ramsbottom valves at Nationalisation (1948).

J17 No. 8202 caught in bomb damage at Chadwell Heath Station on 20th April 1941 (E.Maycock)

All ninety locomotives were initially allocated to March and Peterborough for use on coal and heavy goods trains. They continued to haul these services well after Grouping (1923). The continued to be concentrated at March and Peterborough past 1931, when larger engines were beginning to appear on these workings. In 1931, the J16s & J17s were allocated to: March (60), Peterborough East (10), Stratford (8), Norwich (5), Parkeston (4), King's Lynn (2), and Cambridge (1).

J17 BR No. 65567 at Swaffham, on the RCTS GE Commemorative Steam Tour, 31/3/62 (M.Morant)

During the 1930s, the J17s tended to be displaced to subsidiary and branch line duties with the introduction of eight-coupled goods locomotives. In 1942, many were moved to the former Midland & Great Northern Joint Railway (M&GN) to replace withdrawn locomotives. Seventeen J17s were fitted with vacuum ejectors and steam heating apparatus in order to haul passenger services on the M&GN. Although they were not designed as passenger locomotives, the J17s performed reasonably well and were capable of faster running. After Nationalisation (1948), the J17s were displaced from the M&GN by Ivatt 2-6-0s. During the 1950s, ex-M&GN J17s were occasionally seen hauling emergency passenger workings in the GE Area.

The first withdrawal was No. 8200 after sustaining extensive damage from a V2 rocket explosion in November 1944. Normal withdrawals started in 1954 and were rapid. The entire class was withdrawn by the end of 1962. One of the last J17s to be withdrawn was No. 65567 which has been preserved as a part of the National Collection.

Technical Details

J16 J17, saturated J17, superheated
Cylinders (x2): (inside) 19x26in. 19x26in. 19x26in.
Motion: Stephenson Stephenson Stephenson
Valves: slide slide slide
Boiler: Max. Diameter: 4ft 9in 4ft 9in 4ft 9in
Boiler: Pressure: 180psi 180psi 180psi
Diagram No.: 28 27 27
Heating Surface: Total: 1624.38 sq.ft. 1678.84 sq.ft. 1429.9 sq.ft.
Firebox: 107.8 sq.ft. 117.7 sq.ft. 117.7 sq.ft.
Superheater: 154.8 sq.ft. (18x1.1in)
Tubes: 1516.5 sq.ft. (274x 1.75in) 1561.1 sq.ft. (282x 1.75in) 874.7 sq.ft. (158x 1.75in)
Flues: 282.7 sq.ft. (18x 5in)
Grate Area: 21.6 sq.ft. 21.6 sq.ft. 21.6 sq.ft.
Wheels: Coupled: 4ft 11in 4ft 11in 4ft 11in
Tender: 4ft 1in 4ft 1in 4ft 1in
Tractive Effort: (@ 85% boiler pressure) 24,340 lb 24,340 lb 24,340 lb
Wheelbase: Total: 38ft 0in 38ft 0in 38ft 0in
Engine: 17ft 8in 17ft 8in 17ft 8in
Tender: 12ft 0in 12ft 0in 12ft 0in
Weight (full): Total: 82 tons 16cwt 83 tons 13cwt 83 tons 13cwt
Engine: 44 tons 11cwt 45 tons 8cwt 45 tons 8cwt
Tender: 38 tons 5cwt 38 tons 5cwt 38 tons 5cwt
Max. Axle Load: 15 tons 18cwt 16 tons 11cwt 16 tons 11cwt
Detail of the front cylinder and piston valve covers of J17 No. 8217 (in preservation) Motion detail of J17 No. 8217, in preservation

Preservation

J17 No. 82175 at the National Railway Museum

One J17, No 8217, has survived into preservation, and now is a part of the National Collection at York.

Models

J17 kits are available for 4mm scale (OO gauge) from PDK and Crownline.

DMR sell a kit of the J17 for 7mm scale (O gauge).

Acknowledgements

Thank you to Rob Marsden for the two external photographs of the preserved J17 No. 8217.

Thank you to Malcolm Peirson for the photograph of LNER No. 8163.

Thank you to Edwin Maycock for the photograph of J17 No. 8202 caught in the bomb damage at Chadwell Heath station. This photograph was taken on 20th April 1941 by Tomas M. Spurge of the LNER's Southern Area Engineers Department.

Thank you to the Mike Morant Collection for the photograph of BR No. 65567 at Swaffham.




 
border image border image